Enable Internet in Hyper-V

Question

I'm using Hyper-V to run virtual machines, but I'm unable to connect to the internet from within the VMs. I suspect the issue might be related to the virtual network setup.

Could someone guide me on the proper steps to enable internet access for virtual machines in Hyper-V?

Comments

Have you created an External netowrk adaptor

Answer 1

How to enable Internet in Hyper-V for a Virtual Machine?

To enable internet access for a virtual machine in Hyper-V, you need to configure a virtual switch and attach it to the virtual machine as the following:

• Press Win + S, search for Hyper-V Manager, and open it.
• In the right-hand pane, click Virtual Switch Manager.
  
• Select External under "Create Virtual Switch."
• Click Create Virtual Switch.
  
• Choose the network adapter connected to the internet.
• Check Allow management operating system to share this network adapter if needed.
• Click OK to save.
  
• In Hyper-V Manager, select the VM you want to enable internet for, and make sure it's shut down to can edit its settings.
• Right-click on the VM and choose Settings.
• Under Hardware, click Add Hardware (if no network adapter exists).
• Select Network Adapter and click Add.
  
• Select the newly added Network Adapter.
• From the dropdown menu under "Virtual switch," choose the virtual switch you created earlier.
• Click Apply and then OK.
  
• Start the VM.
• Now, Open the VM and log in to its operating system.
• Ensure the VM's network adapter is set to obtain an IP address automatically (DHCP).
• Open Control Panel > Network and Sharing Center.
• Click Change adapter settings.
• Right-click the network adapter and choose Properties.
• Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
• Ensure Obtain an IP address automatically and Obtain DNS server address automatically are selected.

You might also like to read The Boot Configuration Data for your PC is missing or contains errors

Comments

Very helpful